EU en
Menu

11 999 € RETAIL PRICE

  • Power output: 75 watts per channel continuous from20Hz to 20kHz. 1kHz total harmonic Distortion typically 0.6% at 75 watts, below 0.05% at 1 watt. Approximate actual power available at ‘clipping’ 76 watts (1kHz). (Note that actual Power output is dependent upon both line voltage and ‘condition’ i. e.: if power line has high Distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.)
  • Power bandwidth: (-3dB points) 7Hz to 60kHz
  • Frequency response: (-3dB points at 1 watt) 0.7Hz to 75 kHz
  • Input sensitivity: 1.4V RMS BAL for rated output. (25 dB Bal Gain into 8 ohms.)
  • Input impedance: 300K ohms Balanced.
  • Output Polarity: Non-inverting. Balanced input pin 2+ (IEC-268)
  • Output taps: 8 ohms, 4 ohms
  • Output regulation: Approximately 1.0dB 8 ohm load to open circuit (Damping factor approximately 8)
  • Overall negative feedback: 15dB
  • Slew rate: 10 volts/microsecond
  • Rise time: 4.0 microseconds
  • Hum & noise: Less than 0.06mV RMS – 112dB below rated output (IHF weighted, input shorted)
  • Power supply energy storage: Approximately 520 joules
  • Power requirements: 105-125VAC 60Hz (210-250VAC 50Hz) 410 watts at rated output, 500 watts maximum, 230 watts idle
  • Tubes required: 2 – Matched pair KT150 – Power output; 2 – 6H30 Driver
  • product dimensions: 483 x 222 x 495 mm
  • net weight: 21.30 kg
  • minimum quantity: 1 pcs
  • DOCUMENTS

    SALE