SP1000I-12

Inverter 12V/220V

SMART-INPURE with IVT function is a range of inverters with an integrated priority system (Priority Switch type). This special IVT function, via the two 230 V input and output sockets, allows management of the voltage coming from the inverter connected to the battery and from the external grid. When the external network (grid) is connected in the system, it will have priority in order to preserve the battery; when it is disconnected, the inverter will supply the 230V output socket and the entire system connected to it.

SMART-IN is the range of 12 V 220 V pure wave and modified wave (or 24 V 220 V for some models) inverters that stand out for their construction quality and design. Designed to guarantee high performance, maximum safety, reliability and, above all, silent operation, which is important for those who install the inverter inside the cabin. Thanks to the adoption of some special engineering solutions, SMART-IN inverters are also suitable for professional use.

SMART-IN can be used as inverter air conditioners, inverter air conditioners, and especially in the pure wave version to power all the finest electronics, such as televisions, PCs, and all professional and healthcare equipment.

SMART-IN inverters can boast some of the lowest self-consumption on the market, and considering that very often an inverter remains in stand-by mode, thus continuing to consume current, minimising this absorption is fundamental and of great benefit to the user, who will not discharge the battery unnecessarily.

Totally insulated input and output, to prevent any anomaly in the devices connected on the output from damaging those on the input or vice versa, allowing a high degree of safety. Professional connectors that, unlike the cheap inverters commonly on the market, are integrated directly into the board, allowing a substantial reduction in the voltage drop on the connection between the device and the battery, improving its performance, and for the same power absorbed by a 230 V consumer (e.g. a TV) there is less consumption on the battery than with classic inverters.

• High-frequency system
• High efficiency of up to 93%
• Low self-consumption
• Input with professional connectors
• Ready for remote On/Off control
• Fully isolated input and output
• Priority function
• Relay changeover time from inverter to 230 VAC external mains = 20 ms
• Relay changeover time from 230 VAC to external mains = 100 ms
• Input voltage: 12 V
• Continuous power: 1000 W
• Pico power: 3000 W
• Output voltage: 230 VAC
• USB outputs: 5 V, 2.1 A
• Cables included: 16 mm² length 80 cm