SM400-12

Inverter 12V/220V

SMART-IN is the range of 12 V 220 V pure wave and modified wave (or 24 V 220 V for some models) inverters that stand out for their construction quality and design. Designed to guarantee high performance, maximum safety, reliability and, above all, silent operation, which is important for those who install the inverter inside the cabin. Thanks to the adoption of some special engineering solutions, SMART-IN inverters are also suitable for professional use.

Smart-In Modified, with a relatively simpler and cheaper electrical circuit than the Pure version, generates a 'modified sine wave', similar to a square wave. This series is recommended for simpler users, such as lighting, resistive loads, etc. Remember: the modified wave may shorten the life of your devices.

SMART-IN can be used as inverter air conditioners, inverter air conditioners, and especially in the pure wave version to power all the more sophisticated electronics, such as televisions, PCs, and all professional and healthcare equipment.

SMART-IN inverters can boast some of the lowest self-consumption on the market, and considering that very often an inverter remains in stand-by mode, thus continuing to consume current, minimising this absorption is fundamental and of great benefit to the user, who will not discharge the battery unnecessarily.

Totally isolated input and output, to prevent any anomaly in the devices connected on the output from damaging those on the input or vice versa, allowing a high degree of safety. Professional connectors that, unlike the cheap inverters commonly on the market, are integrated directly into the board, allowing a substantial reduction in the voltage drop on the connection between the device and the battery, improving its performance and for the same power absorbed by a 230V consumer (e.g. a TV) there is a lower consumption on the battery compared to classic inverters.

• High-frequency system
• High efficiency of up to 93%
• Low self-consumption
• Input with professional connectors
• Ready for remote On/Off control
• Fully isolated input and output
• Input voltage: 12 V
• Continuous power: 400 W
• Pico power: 800 W
• Output voltage: 230 VAC
• USB outputs: 5 V, 2.1 A
• Cables included: 6 mm² length 80 cm